All articles

Tiling costs: scope, bathroom budgets and comparing quotes

Compare the full work scope rather than a single square-metre rate. Check substrate preparation, waterproofing, tiling, grouting, waste removal, materials and taxes before choosing a provider.

A localized edition with selected original examples and a link to the source article. Estonian original

What determines tiling costs?

Area, tile format, pattern, cuts, corners, substrate condition and wet-room details affect labour. A small bathroom can cost more per square metre because it has more details relative to its area. Large formats, mosaics and diagonal patterns require a different scope and price.

The Estonian source article presents illustrative 2026 labour ranges from external price guides. They are not Ehitusabi24 tariffs or a guaranteed quote. Confirm current figures, materials and VAT with the provider.

Check every work item

An absent line requires clarification; it is not automatically included. Agree the waterproofing system and responsibility before work starts. Plumbing relocations should be quoted separately or explicitly included.

  • Demolition of old tiles and fittings and waste removal.
  • Primer, levelling, filling and any plasterboard boxing.
  • Wet-room waterproofing, corner tapes and pipe penetration seals.
  • Wall and floor tiling as separate quantities, with patterns and mosaics itemised.
  • Grouting, silicone joints and edge profiles.
  • Niches, drains, access hatches and other details.
  • Who supplies tiles, adhesive, grout and waterproofing products.

Illustrative bathroom calculation

The original article uses a 4 m² floor, 20 m² of walls and 10 m² of waterproofing. At the cited illustrative labour rates: floor tiling 32–45 €/m² gives €128–180; wall tiling 35–50 €/m² gives €700–1,000; waterproofing 20–35 €/m² gives €200–350. The labour subtotal is €1,028–1,530.

This is an example, not a final budget. Tiles, other materials, demolition, levelling and plumbing fixtures may be extra. Mosaic or diagonal work can increase the wall line. In a small bathroom, wall area often contributes more to the total than the floor. The painting calculator can help describe wall and ceiling areas for related painting work.

Plasterboard and partition work

The source article’s illustrative 2026 ranges are: general plasterboard walls 35–55 €/m²; a standard 100 mm partition 40–60 €/m²; a double-board acoustic wall 55–80 €/m²; simple partition materials 14–22 €/m². Verify the inclusions and taxes in an actual quote.

A 3 m by 2.6 m partition is 7.8 m². At 40–60 €/m², the source’s example gives €312–468 for its stated scope. Acoustic specifications can increase this. Ask about door framing, electrical boxes, insulation, moisture or fire performance and the required finish.

Q1–Q4 filling classes describe finish level: basic joint filling differs from full-surface finishing for demanding lighting and paint. For bathroom surfaces, agree suitable boards and a separate waterproofing scope.

How to compare quotes

The original article cites a Statistics Estonia report of a 3.8% year-on-year construction-price increase in the third quarter of 2026. This is dated context, not a forecast or an adjustment formula for your quote. Ask for a fresh quote rather than treating last year’s price as current.

  • Decide the tile format and pattern before asking for prices.
  • Give every provider the same measurements, photos and description.
  • Compare item names, quantities, units, unit prices, net total, VAT and gross total.
  • Use the most detailed quote to identify missing work in others.
  • Compare the complete price rather than choosing by one cheap line.
  • Agree how hidden defects and extra work are assessed and approved before execution.

Keeping the budget under control

Plan plumbing, plasterboard and tiling together to avoid repeated visits. Clarify drain positions and finish choices early. Do not substitute poor substrate preparation for genuine savings; it can lead to loose tiles and failed joints.

Ehitusabi24 helps clients describe work once and compare offers. The provider sets the work price. You choose the provider and agree the contract, materials, timing and payment directly. Contacts are shared through the platform’s designated selection or confirmed-visit steps.

Requesting offers and provider fees

Submitting a work request is free for clients. State the actual location, room dimensions, tile format, pattern, condition and timing. The number and arrival of offers depend on provider interest and availability.

The source article lists provider plans at Starter €12.28, Pro €37.08 and Business €74.28 per month and €5 per offer. Check the current price list and trial terms before purchasing; this dated article does not replace those conditions.

Post a job